Items Currently For Sale
If interested in any of these items, contact me at briangosselin4ATyahoodotcom.

Click here to return to the main home page...


Ofna CRT.5 1/12 Scale Truggy

Price including insured shipping:

$250 for everything including Spektrum receiver
$220 for everything minus receiver
$120 for everything minus receiver, motor, or speed controller

Item Description:

Vehicle itself is in decent condition. Body shell is in poor condition - mostly held together with duct-tape. Tires are 2.2" Prolines. Body mounts were moved a little to place less stress on the body when the vehicle crashes, but the body was already in bad shape by the time I made the mod.

Highlights:

  • Mamba Max Pro ESC
  • Medusa 36-50-3300 motor with an added heatsink. Motor doesn't need the heatsink, but the last motor I used (Castle CMs4600) needed it, so I just left it on.
  • Hitec 225HG mini steering servo
  • 8th scale front buggy shocks on the rear, Revo shocks on the front.
  • Custom 6061-T6 aluminum motor mount, top plate, and battery tray (designed for 6 NiMH cells or 3s lipo).
  • Assorted extra parts pictured in the bin (bin not included)

Pictures:

Hyperion EOS 7i Charger, Converted ATX computer Power Supply, and Hyperion LBA10 Balancer

Price including insured shipping:

$70 for everything

Item Description:

Charger: The charger is old, but still works, I just got a new charger so this is just collecting dust. The charger is rated for 1-5s lipo/25 NiXX/1-6 lead-acid, 1-7A charge rate, and has a 120w power limit. It will discharge up to 3A or 20w, whichever comes first. There is no LiFe setting. I changed the input cable because I found the stock wiring too small. At some point, the wire got partially cut, so I reconnected using soldered butt-connectors (the black lump in the middle as seen in the picture).

Power Supply: The power supply is a converted PC Enlight ATX unit. Rated 15A @ 12v. It will run the charger up to its 120w rating with ease, but not sure how much beyond that. The heatsink you see on the side is where the 5v loading resistors are. The AC cord is included.

Balancer: The LBA10 is rated up to 6s and 10A. It has a modded balance connector so that it will plug into pretty much any balance plug as long as it is the typical 0.1" spacing. Just make sure the black wire goes to the most negative cell on your pack.

Pictures:

Rockford Fosgate T600-4 4-Channel Car Amplifier

Price including insured shipping:

$150

Item Description:

Item was purchased as a manufacturer-refurbished item from eBay. I hooked it up to a 12v power supply to test it and all channels work fine, but I never installed it.

Click here for the manual.

Ratings:
  • 100w rms X 4 channels into a 4 ohm load.
  • 150w rms X 4 channels into a 2 ohm load.
  • 300w rms X 2 channels bridged into a 4 ohm load.
  • Has adjustable lowpass/highpass/allpass crossover, adjustable bass/treble boost, etc.

What's included:

  • Amplifier

Pictures:

Phoenix Gold BassCube Subwoofer Signal Processor

Price including insured shipping:

$85

Item Description:

Item is in good condition and worked perfectly when I removed it from my vehicle. Lets you adjust boost frequency and level from the front of the car. Also has a subsonic filter. However, the cable connecting the units was cut, but I kept the ends as an example when making/buying a new cable. It's a regular telephone cable, so nothing major. The front control has a panel hotglued to the rear to prevent stuff from getting in the little box.

Click here for the manual.
Click here for the "secrets" manual.

What's included:

  • Phoenix Gold BassCube processor module
  • Power cable and connector
  • Small bit of signal "telephone" cable which you can use as a guide when making/buying a new one
  • Dashboard control unit

Pictures: